Helmet
An approved and correctly fitting full-face helmet which must:
a) Carry the Standards Association of Australia “AS 1698” label; or
b) Be approved under FIM Technical Rules
Goggles and Visors
Eye protection, including spectacles, protective goggles, helmet visors and/or ‘tear-offs’ must be worn provided:
a) Eye protectors and spectacles are made of non-shattering material,
b) Eye protectors which cause visual disturbance are not to be used,
c) Visors are an integral part of the helmet,
d) Metal or perspex face shields are not used,
e) Eye shades or peaks are of a flexible material.
Clothing
A 1-piece leather suit or jacket and trousers constructed of leather or other material of similar or greater durability, which meets FIM requirements,
a) Where jackets or 1-piece suits are fitted with front opening slide fasteners, a safety strap must be fitted and secured at the neck,
b) In the case of a jacket and trousers, provision must be made to attach the rear of the jacket securely to the trousers,
c) The following areas must be padded with at least a double layer of leather or enclosed plastic foam at least 8mm thick:
i) Shoulders,
ii) Elbows,
iii) Both sides of torso and hip joint, and
iv) Knees.
A commercially manufactured back protector, which continuously covers the back area between the collar line and the base of the spine.
Gloves
Gloves of leather or other material of similar or greater durability.
Footwear
Boots with ankle and calf protection which must:
a) Be constructed of leather or other material of similar or greater durability. but not constructed of rubber,
b) At least overlap the suit or trousers when the rider is in the normal riding position,
c) Not have soft leather soles.
Motocross boots are approved.